How To Install A Bathroom Exhaust Fan On The First Floor
Not everyone is fortunate enough to have attic access, which means installing specific devices may become challenging. In this article, we'll talk about how to install a bathroom exhaust fan on first floor because we know there's always a workaround for seemingly impossible home situations.
A Quick Guide To Installing A Bathroom Exhaust Without An Attic
The crucial thing about learning how to install a bathroom exhaust fan on first floor is finding the best path for the exhaust duct. Let's get started!
Things you need to consider before installation:
- Installation of an exhaust fan requires knowledge of electricity. Ask for assistance from knowledgeable people in your circle.
- Shut off power from the fuse box before starting installation.
- Seal or note the fuse box, so no one turns it on accidentally.
Tip: The best way to start a first-time installation is to expose your walls and ceilings so you'll know your fan's best exit route.
- Step 1 - Get your wire and run it through the ceiling where your fan should be placed. Hang your wire on the ceiling with a screw.
Note: Ideally, the fan should be located above the tub or the shower, where there is most moisture.
- Step 2 - Locate the area for your ductwork. This part is very important because your fan should function well enough to prevent moisture from accumulating.
- Step 3 - Drill through the area.
- Step 4 - Mark the diameter for your exhaust duct, and cut through.
Note: You can start covering the wall ceilings and walls before proceeding.
- Step 5 - Break through the other side for your ductwork.
- Step 6 - Bring the ductwork through the hole and attach your vent cover securely to the wall. You don't want water getting in, so make sure to seal off all the gaps.
- Step 7 - Take out your fan's box and note the hole for the electrical.
- Step 8 - Cut through the ceiling or the wall so you can position your fan.
- Step 9 - Find your duct and wires.
- Step 10 - Position your fan's box, and cut off any extra ducting if necessary.
- Step 11 - Drill screws on the outline of the square you made for your box and make the necessary adjustments.
- Step 12 - Slip the wire through the hole on your fan's box and screw it securely in place.
- Step 13 - Pull the ducting through your fan's housing.
- Step 14 - Start working on your wires. Twist your wires and make sure you don't see the copper wires for safety.
- Step 15 - Slide the tab up for the housing of your wiring.
- Step 16 - Slide your fan into its housing and screw it securely in place.
- Step 17 - Plug your fan into power.
- Step 18 - Cover your fan with the grill provided.
Learning how to install a bathroom exhaust fan on first floor is tricky because of some wiring concerns. But, be proud. By the time you finish, you can rest easy knowing that moisture in the home will be properly managed.