How To Clean A Vornado Fan: A Step-By-Step Guide
Vornado fans are compact and powerful. They send breeze to provide ventilation to a spacious room without the noise.
With its structure, you may be wondering how to clean Vornado fan? We have summarized essential tips to keep your fan tidy and functional.
Detaching Front Grill And Blade
As with your other appliances, always make sure to unplug the fan before cleaning it to avoid risks of electric shock and other injuries.
Also, you need to remove a Vornado fan’s front grill before cleaning. Different models call for different methods on how to take apart a Vornado fan.
To remove the front grill of a Vornado Fan Model 133, remove the four screws located at the back of the inlet grill at 2, 5, 7, and 10 o’clock positions. Then, release the front grill.
For Vornado Fan Models 533, 633, 683, and 753, remove the three screws located between the ribs of the inlet grill. Unscrew at 10, 2, and 6 o’clock positions. Then, release the front grill clips located at 2, 5, 7, and 10 o’clock positions. You are not advised to remove the two screws on the pivot arms.
Moreover, you also need to remove the fan’s blade for proper cleaning. Turn the nut clockwise to loosen and remove it from the shaft. Then, pull the blade out of the shaft.
Cleaning A Vornado Fan
Now that you have unplugged the fan and removed the front grill and blade from the fan body, you are ready to get cleaning.
- Remove accumulated dust in your front grill and air inlets using a vacuum with a brush attachment. Take your time so you can clean as much dust as possible.
- Or, wash your front grill with water and mild dishwashing soap. Use a soft sponge to scrub away dirt and dust. Do not put the front grill in a dishwasher.
- Wipe the fan blade with a damp cloth. You can use a cloth dampened with water and mild soap to wipe off grease from the blade.
Re-attaching Blade And Front Grill
After cleaning, re-attach the blade. Check if the flat side of the shaft and the flat side on the blade’s socket are parallel. Then, push the blade straight down to the shaft. If the blade sits snuggly at the bottom, re-install the nut.
To re-attach the front grill of Vornado Fan Model 133, position the grill, so the Vornado logo at its center is upright. Then, replace all screws.
To re-attach the front grill of Vornado Fan Models 533, 633, 683, and 753, align the grill with the holes and snap each clip back in place. Then, replace the screws.
Conclusion
You have learned here how to clean Vornado fan. Observe the instructions carefully to avoid damaging your fan. If you have kept the owner’s manual that came with its retail package, use it as a reference in cleaning and troubleshooting the appliance.